DINAR1_IOT
Godzilla’s Rusty Toenail Clipper
DINAR1 Expansion Card
Internet of Things (IOT) Prototyping

- Bluetooth/ANT with LS Research TiWi5
- IEEE 802.11a,b,g,n,d,e,i compliant
- Bluetooth 1.1, 1.2, 2.0+EDR and 2.1+EDR 3.0 and 4.0, BLE (Bluetooth Low Energy)
- ANT, Power Class 1.5
- IrDA – infrared remote control transmission
- Magnetometer, Accelerometer, Gyroscope (INEMO-M1)
- Gyroscope:
- L3GD20: 3-axis digital gyroscope (roll, pitch, yaw)
- 16-bit data output
- ±250°/s, ±500°/s, ±2000°/s selectable full scale
- Accelerometer/Magnetometer:
- LSM303DLHC: 6-axis digital e-compass module
- ±2g, ±4g, ±8g, ±16g linear acceleration programmable full scale
- Thermal Sensor (Omron D6T)
- Option for 4x4 or 1x8
- 5°C to 50°C
- Humidity/Temperature Sensor (Honeywell HIH6000)
- 14-bit temperature
- 14-bit humidity
- Audio (optional) Stereo, 96 KHZ, 24-bit
- Analog Devices ADAU1761
- SigmaDSP 28-/56-bit, 50 MIPS digital audio processor
- 24-bit stereo audio ADC and DAC: >98 dB SNR
- Sampling rates from 8 kHz to 96 kHz
- Analog input:
- Single channel stereo single-ended
- Dual differential channels
- Analog Output
- Stereo
- 2 single-ended mono
- mono headphone output driver
- 6 – SPI interfaces (Serial Peripheral Interface) and 6 – I2C interfaces
- Interface for additional sensors such as
- Leaks/levels
- Force/load/torque/strain/pressure
- Fluid flow
- Chemical/gas
- Motion/velocity/displacement
- 32.768Khz oscillator
- 8-position DIP switch
- 4 momentary switches