Return of Twin of Godzilla’s Life Coach
ASIC Prototyping Engine Featuring Xilinx Dual Virtex-7 FPGAs
Hosted via 4-lane PCI Express (GEN1)

  • Dual Xilinx Virtex-7 FPGAs (FLG1925 package):
    • 7V2000T-2,-1 (fastest to slowest)
  • 28+ million ASIC gates (ASIC measure) when stuffed with two 7V2000Ts
  • Additional memory can be added using DINAR1_SODM204 on a DINAR1expansion connector:
    • DDR3 SODIMM (native)
  • GTP low-power transceivers interfaces (-2 required for 10 GbE):
    • FPGA A:
      • 4 SFP+ sockets (10 GbE)
      • QSFP+
        • 4 channels 10 GbE or single channel 40 GbE
      • Dual SEARAY GTP Expansion headers, 8-lanes each.
        • 8-lane PCIe, CX4, 4 SFP+ sockets, USB3.0, SATA II, SMAs
    • FPGA B:
      • 4 SFP+ sockets (10 GbE)
      • 4-lane PCIe GEN1/GEN2 prototyping via iPASS cable
      • Dual SEARAY GTP Expansion headers, 8-lanes each.
        • 8-lane PCIe, CX4, 4 SFP+ sockets, USB3.0, SATA II, SMAs
  • Marvel MV78200 Discovery Innovation Dual CPU
    • 1 GHz clock
    • Dual USB2.0 ports (Type B connector)
    • Dual Serial-ATA II connectors for 2 external hard drives (SATA II)
    • Gigabit Ethernet interface
      • 10/100/1000 GbE (RJ45 connector)
    • SheevaTM CPU Core (ARM v5TE compliant)
      • Out-of-order execution
      • Single and double-precision IEEE compliant floating point
      • 16-bit Thumb instruction set increases code density
      • DSP instructions boosts performance for signal processing applications
      • MMU to support virtual memory features
      • Dual Cache: 32 KB for data and instruction, parity protected
      • L2 cache: 512 KB unified L2 cache per CPU (total of 1MB), ECC protected.
    • 1 GB external DDR2 SDRAM
      • Organized in a 128M x 64 configuration
      • 400 MHz (800 MHz data rate with DDR)
    • RS232 port for terminal-style observation
    • After configuration, both CPUs dedicated entirely to user application
    • Linux operating system
      • Source and examples provided via GPL license (no charge)
      • ~15 seconds to CPU boot
  • Five independent low-skew global clock networks and single fixed clock
    • Five, high-resolution, user-programmable synthesizers
      • Silicon Labs Si5326: 2kHz to 945 MHz
    • User configurable via Marvell uP RS232, USB, PCIe, or Ethernet
    • Global clocks networks distributed differentially and balanced
  • Flexible customization and stacking via 3 daughter cards positions per FPGA
    • DINARI expansion connector
      • Connector: non-proprietary; readily available; cheap
    • 72 LVDS pairs + clocks (or 144 single-ended)
    • 700 MHz on all signals with source synchronous LVDS
    • Signal voltage set by daughter card (+1.2V to +1.8V)
    • Reset
    • Supplied power rails (fused):
      • +12V (24W max)
      • +3.3V (10W max)
    • Pin multiplexing to/from daughter cards using LVDS (up to 10x)
  • Fast and Painless FPGA configuration
    • USB, cabled PCIe, Ethernet, JTAG
    • Stand-alone configuration with USB stick
    • Configuration Error reporting
    • Accelerated configuration readback for advanced debug
  • RS232 port for embedded FPGA-based SOC uP debug
    • Accessible from all FPGAs via separate 2-signal bus
  • Full support for embedded logic analyzers via JTAG interface
    • ChipScope, Tektronix Certus™
  • Hosted via
    • 4-lane GEN1 PCIe (v1.1) via iPASS cable, USB2.0
    • 10/100/1000BASE-T Ethernet, or stand alone
  • Status FPGA-controlled LEDs
    • Enough multicolored LEDs to illuminate the coming zombie apocalypse


The DNV7F2B is a complete logic prototyping system that enables ASIC or IP designers a vehicle to prototype logic and memory designs for a fraction of the cost of existing solutions. The DNV7F2B is a stand-alone system and can be hosted by 4-lane PCIe cable (GEN1), USB or Ethernet. A single DNV7F2B configured with two Virtex-7, 7V2000Ts can emulate up to 28 million gates of logic as measured by a reasonable ASIC gate counting standard. TwoDNV7F2Bs can be linked together, doubling this gate count to 56 million seamlessly. The gate count estimate number does not include embedded memories and multipliers resident in the FPGA fabric. One hundred percent (100%) of the Virtex-7 FPGA resources are available to the user application. The DNV7F2B achieves high gate density and allows for fast target clock frequencies by utilizing FPGAs from Xilinx's 28nm Virtex-7 family.

Virtex-7 FPGA from Xilinx — Stacked Silicon

The DNV7F2B uses a high I/O-count, 1925-pin flip-chip BGA package (FLG1925). In this package, the largest and only device, the 7V2000T, has 1200 I/Os. All I/Os are utilized. Abundant fixed interconnects (either differential or single-ended) are provided between the user FPGA and the configuration FPGA. 100% of the resources of the two Virtex-7 FPGAs is dedicated to the user application.

With two 7V2000Ts, the DNV7F2B is capable of prototyping >28 million gates of ASIC logic with plenty of resource margin. This is a ground breaking device and the first to utilize 2.5 silicon dimensions. Prior to the stacked 7V2000T, the biggest challenge in FPGA-based ASIC prototyping was logic partitioning. This difficult task is dramatically eased with this large quad-slice device.


Memory can be added to the DNV7F2B via the DINAR1 expansion connector using theDINAR1_SODM204 expansion card. Each DINAR1 can host a singleDINAR1_SODM204 expansion card, so as many as six of these cards can be used DNV7F2B. The DINAR1_SODM204 has a single 204-pin SODIMM socket. Off-the-shelf DDR3 SODIMM modules work fine, allowing you to add up to 8GB of low cost memory in eachDINAR1 position. In addition, we have compatible SODIMMs in the following variations: flash, SSRAM, QDR II+, mobile SDRAM, Mictors, USB2.0 PHYs, and more.

Stacking two boards together

Two DNV7F2Bs can be ganged together to double the resources or added to a DNV7F4A. This page here has more detail using the DNV7F2A: ‘Stacking Two DNV7F2A board together’. All functionality is seamlessly maintained including the high performance data movement via the NMB busses. When two DNV7F2Bs are stacked, the resulting system can handle at least 56 million ASIC gates.

The Marvell MV78200 Discovery™ Dual CPU
A MONSTER for data movement and manipulation

Easy FPGA configuration is a required feature of large FPGA boards. We use an onboard CPU to handle this function. We choose a Marvell MV78200 from the Discovery™ Innovation CPU family. Bluntly stated, this CPU is massive, massive overkill for the mundane task of FPGA configuration. The MV78200 comes a variety high performance interfaces, and all can be utilized to your advantage.

Dual Sheeva™ CPUs, 1GHz with floating point

First and foremost are dual CPUs. And after we are done configuring the FPGAs we dedicate both CPUs to your application. The CPUs in the MV78200 are Marvell Sheeva™ cores, which are ARM v5TE compliant. The CPUs are clocked at 1GHz and each processor has a single and double precision floating point unit. A fixed 1 GB, DDR2 memory is standard and is useful for large amounts of high speed data buffering. The memory is organized as 128M x 64 and clocked at the full frequency allowed: 400MHz (800MHz effective with DDR). This DDR2 bank is shared between the two CPUs. Boot code is resident in an SPI Flash, and application code is downloaded via any port: PCIe, USB, and Ethernet. We ship Linux as the standard operating system. Options exist for VxWorksand other real-time operating systems. Contact the factory for more information.

PCI Express

The Marvell 78200 acts as a two-port high-speed PCI Express switch (2.5 Gb/s). It connects the user FPGA at 4-lane PCI Express speeds to a host computer. The Marvell 78200 has multiple DMA engines to pump data to and from any port. The user interface on the FPGA is a simple-to-use, pipelined A/D bus running at 6.4Gb/s. Drivers for data movement to and from a host machine are provided. A simple example FPGA design and host computer application streaming data at PCI Express x4 bandwidth to the user FPGA is provided.

Two Serial-ATA Ports (SATA II)

The MV78200 has two Serial-ATA Generation 2 (SATA II) ports, each capable of running at 3.0 Gb/s. SATA is intended for high speed data transfer to/from serial-ATA hard drives. Two SATA connectors are provided, allowing for direct, high-speed interfacing to external hard drives. The MV78200 has specialized enhanced DMA (EDMA) engines for HDD data transfer with 512-byte buffer for each channel. Examples of all possible data movement options, with source, are included.

GbE - 802.3 Gigabit Ethernet

The MV78200 can be controlled over its built-in Ethernet port. The interface is a standard RJ45 connector. This port can be used to configure FPGAs, set board clocks and other resources, and access the Linux terminal. This terminal can also be used to send data to and from the user FPGA design at gigabit Ethernet speeds.

Expansion connectors for customization, memory, and stacking

The DNV7F2B uses a connector standard called DINIARRAY (DINAR1), which utilizes 320-pin Samtec SEAM series connectors. Three of these connectors are attached to the user FPGA, enabling expansion, customization, and stacking. This is a non-proprietary, industry standard connector and the mating connector is readily available. We can provide the mating connector to you at our cost. We are not fans of proprietary, hard-to-get, outrageously priced expansion connectors. And we will NEVER restrict your access to these connectors. The 144 signals (72 pairs) to/from each of these expansion connectors are routed differentially and can run at the limit of the Virtex-7 FPGA I/Os: 710 MHz (assumes -2 or faster). Clocks, resets, and presence detection, along with abundant (fused) power are included in each connector.

DINAR1 connectors (A1 and B0) and/or (A2 and B2) can be connected using this card to increase FPGA to FPGA interconnect: DINAR1_INTERCON

Easy Configuration via PCIe, USB, or Ethernet

Configuration of the FPGAs is under the control of the Marvell CPU. Configuration data can be provided over PCI Express, USB, Ethernet, or on-board non-volatile memory. It can be copied to the board using a USB memory stick (provided). Configuration occurs automatically after the CPU boots. Sanity checks are performed automatically on the configuration files, streamlining the configuration process in the case of human error. Multiple LEDs provide instant status and operational feedback.

Status LEDs, Debug

As with all of our ASIC emulation boards, the DNV7F2B is loaded with LEDs. The LEDs are stuffed in several different colors (red, green, blue, orange et al.). There are enough LEDs here to adequately illuminate the coming zombie apocalypse. When the zombie apocalypse happens, take shelter. And use the DNV7F2B to provide light. A helpful chart is here: Surviving a Zombie Apocalypse. These LEDs are user controllable from the FPGAs so can be used as visual feedback in addition to emergency lighting. A JTAG connector provides an interface to ChipScope, Tektronix Certus and other third party debug tools.

Specs of FPGAs Available on the DNV7F2B

Table 1

Related Documents

Product Brief

Related Resources

Dini Buses User FPGA Design Manual
PCIe DMA (ConfigFPGA design) User Manual