Products

DINAR1_SOC

DINAR1_SOC

DINAR1 Expansion Card with the Kitchen Sink of SOC Peripherals

  • 10Base-T/100Base-T/1000Base-T Ethernet Transceiver (802.3)
    • RGMII bus interface
  • USB2.0 Transceiver
    • Device, host, or On-The-Go device (OTG)
    • ULPI bus interface
  • 2 – RS232 ports
    • DB9 connector
  • 16-Bit, Low-Power Stereo Audio CODEC (PCM3793)
    • Microphone Bias
    • Headphone
    • Digital Speaker Amplifier
  • Secure Digital Card Interface Connector (SDIO)
    • I/O Voltage translation
    • Power – 100ma@3.3V
  • Single channel external clock input
    • Via dual SMAs
  • Single channel clock output
    • Via dual SMAs
  • Miscellaneous general purpose I/O (+3.3V)
    • 8-bits on 16-pin 0.1” IDC connector (2 sets)
      • Intended for SPI
    • 2-bits on 8-pin 0.1” IDC connector (2 sets)
      • Intended for I2C
    • 12-bits on 20-pin 0.1” IDC connector (2 sets)
      • Intended for GPIO of any sort
  • ARM JTAG Connector
  • NAND Flash – MT29F16G08
    • 16 Gb with 8-bit data
  • NOR Flash – 28F00AP30
    • 1 Gb with 16-bit data
  • EEPROM – AT24C512
    • I2C interface, 512 Kb
  • Bussed on a shared SPI
    • EEPROM – AT25512, 512 Kb
    • Serial Flash – AT25DL081, 8Mb
    • Serial NOR Flash N25Q256A11E

Overview

The DINAR1_SOC is an expansion card that adds a variety of standard system on a chip (SOC) peripherals and interfaces to any DINAR1 expansion connector.

Related Documents
Related Resources