DNMEG_V5T_10G
Dual 10GBASE-T Meg Array Daughter Card
(or) 8-Lane PCIe hosted
- 10GbE LAN/WAN using SFP+ modules
- Meg-Array daughter card adds 10GbE (via SFP+) to any Dini Group FPGA base board
- Can be plugged directly in to 8-lane GEN1 or GEN2 PCIe slot
- Stand-alone operations supported with external ATX power supply
- Select any Xilinx Virtex-5T FPGA (FFG1136) from the following list:
- LX155T-3,-2,-1 (fastest to slowest)
- LX110T-3,-2,-1
- FX100T-3,-2,-1
- SX95T-3,-2,-1
- FX70T-3,-2,-1
- Dual SFP+ sockets for 10GBASE-T modules
- AMCC QT2225-2 Dual Port Serial 10Gbps-to-XAUI Transceiver
- 10GBase-SR, 10GBase-CU, 10GBase-LR, Others
- 936,000 ASIC gates (ASIC measure) when stuffed with Virtex-5 LX155T
- DDR2 SODIMM, 64-bit data width, 250MHz operation
- PC2-3200/PC2-4200
- Addressing/power to support 4GB
- DDR2 Verilog/VHDL reference design provided (no charge)
- DDR2 SODIMM data transfer rate: 25.6Gb/s
- Alternate pin compatible memory cards available (consult factory for availability):
- SRAM: QDR, ASYNC, STD, or PSRAM, FLASH
- DRAM: SDR, DDR1, PSRAM or RLDRAM, DDR2
- Mictor, USB PHY, Extra Interconnect
- SSRAM - 2M x 36
- Synchronous pipelined burst
- No Bus Latency™ (NoBL™)
- 250MHz bus operation
- Multiple independent low-skew global clock networks
- Silicon Labs Si5326: 2kHz to 945 MHz
- Oscillator: 200MHz for DDR2
- Oscillator: GTP_OSC[4:0](Programmable)
- RS232 port for embedded FPGA-based SOC uP debug
- Full support for embedded logic analyzers via JTAG interface
- ChipScope and other third-party debug solutions
- FPGA-controlled Status LEDs
- Enough illumination to cause goats to faint
-