製品

DN2000K10

DN2000K10
ASIC Prototyping Engine

  • Single FPGA configurations starting at $4,450
  • 32/64 bit PCI-based PWB with six interconnected FPGAs
  • Universal PCI (Virtex FPGAs) or 3.3v PCI (Virtex-E FPGAs) connector
  • 300K–1.8M (LSI-measured) ASIC gates per PWB
  • Stackable to 4 (or more) PWBs
  • Flexible, abundant and configurable embedded memory up to 73 Kbytes single port RAM/ROM or 36 Kbytes of dual port RAM
  • HW locking mechanisms to protect IP
  • 4 low skew clocks:
    • PCI Clock
    • 2 Socketed oscillators
    • 1 User Configured via CPLD
  • Fast 32/64 bit PCI host for configuration and testing
  • Robust observation/debugging capability with 450 connections for logic analyzer or pattern generator stimulus
  • User configurable status LEDs
  • User designed daughter PWB for custom circuitry

Overview

The DN2000k10 is a complete logic emulation system that enables ASIC or IP designers to prototype logic and memory designs for a fraction of the cost of existing solutions. The DN2000k10 can be hosted in 32/64 bit PCI slot, or can be used stand-alone. A single DN2000k10 with all six FPGAs stuffed can emulate up to 2 million gates of logic as measured by LSI. Multiple DN2000k10s can be stacked to get even more total logic gates.

The DN2000k10 achieves high gate density and allows for fast target clock frequencies by utilizing one, four, or six FPGAs from Xilinx’s Virtex™ family for logic and memory. High I/O-count BGA packages are employed allowing for abundant, fixed interconnect between FPGAs. 450 test pins are provided on both the top and bottom of the PWB for the purpose of stacking up to four PWBs to increase the amount of logic, for logic analyzer-based debugging, or for pattern generator stimulus. Custom daughter cards can be mounted to these pins to interface the DN2000k10 to application specific circuits. A Verilog and VHDL reference PCI target design and test bench is provided at no additional cost. PWB configurations can be stored in the FLASH, and jumpers are provided to switch between configurations. Eight LEDs are connected to the CPLD and each LED can be user-configured to provide

Click thumbnail for a larger view.

With six FPGAs:

With one FPGA:

PCI connectors, 3.3 and 5 volt:

Other views:

The bottom:

In a clock-slowed PC:


Related Documents

Related Resources