DNSODM200-Series Daughter Cards
The DNSODM200 series daughter cards plug into the SODIMM slots on all products with memory sockets, including DN8000K10, DN8000K10PCIe8, DN9000K10PCI, DN9002K10PCIE8T, DN9002K10PCI and others. They support a wide variety of features, such as Mictor logic analyzer ports, Flash Memory, SSRAM, QDR Memory, and others.
|
DNSODM200_SSRAM Daughter Card
The DNSODM200_SSRAM is an SODIMM module that can be installed in a 200-pin DDR2 SODIMM socket. This module contains two SSRAM's chips in a 2M x 64 configuration for a total of 16 megabytes.
|
|
DNSODM200_MICTOR Daughter Card
The DNSODM200_MICTOR is an SODIMM module that can be installed in a 200-pin DDR2 SODIMM socket. This module contains two Mictor connectors and three, 12-pin IDC-type headers. Logic analyzers from Tektronix and Agilent can be directly connected to FPGA pins enabling direct high-speed observation.
|
|
|
DNSODM200_QUADMIC Daughter Card
The DNSODM200_QUADMIC is an SODIMM module that can be installed in a 200-pin "DDR2" SODIMM socket. This module contains four Mictor connectors. Logic analyzers from Tektronix and Agilent can be directly connected to FPGA pins enabling direct high-speed observation.
|
|
|
DNSODM200_INTERCON Daughter Card
The DNSODM200_INTERCON is a SODIMM module compatible with all "DDR2" SODIMM slots on Dini Group products. This module provides up to 122 signals on 2mm headers for access. The signals can be used single-ended or differential. Termination resistors are provided to allow the use of standard IDC cabling.
|
|
|
DNSODM200_FLASH Daughter Card
The DNSODM200_FLASH is an SODIMM module that can be installed in a 200-pin DDR2 SODIMM socket. This module contains two flash chips in a 4M x 32 configuration for a total of 16 megabytes.
|
| |
DNSODM200_DDR1 Daughter Card
The DNSODM200_DDR is a DDR2-to-PC2700 adapter card compatible with Dini Group products with DDR2 memory sockets. It allows a standard PC2700 SODIMM module (up to 256MB) to connect to the SODIMM slot of your Dini Group Emulation board.
|
|
|
DNSODM200_SDR Daughter Card
The DNSODM200_SDR is a DDR2-to-PC100 adapter card compatible with Dini Group products with DDR2 sockets. It allows a standard PC133 SODIMM module (up to 512MB of Single-Data rate memory) to connect to the DDR2 slot of your Dini Group Emulation board.
|
|
|
DNSODM200_SE Daughter Card
The DNSODM200_SE is a SODIMM module, compatible with all 200-pin DIMM slots on Dini Group products. The module contains one 256Mb flash and two 32Mb module DRAM chips. Also, an EPROM socket can hold a serial prom with densities up to 512Kb. |
|
|
DNSODM200_QDR Daughter Card
The DNSODM200_QDR is an SODIMM module that can be installed in a 200-pin DDR2 SODIMM socket. This module contains two QDR SSRAM's chips in a 512 x 32 configuration for a total of 2 megabytes. The 32-bit input and 32-bit output busses are separate. |
|
|
DNSODM200_RLDRAM Daughter Card
The DNSODM200_RLDRAM is an SODIMM module that can be installed in a 200-pin DDR2 SODIMM socket. This module contains two RLDRAM's chips in a 1M x 32 configuration for a total of 64 megabytes. |
|
|
DNSODM200_USB Daughter Card
The DNSODM200_USB is an SODIMM module. Details to come. |
